Configuring Interfaces, Zones, And Policies With J-Web - Juniper SRX5400 Hardware Manual

[edit]
root@# set system services web-management http
8. Commit the configuration changes.
[edit]
root@# commit

Configuring Interfaces, Zones, and Policies with J-Web

IN THIS SECTION
Configuring the Hostname | 217
Configuring Interfaces | 217
Configuring Zones and Assigning Interfaces | 218
Configuring Security Policies | 218
You can configure hostnames, interfaces, zones, and security policies using J-Web.
NOTE: You cannot use J-Web to configure SRX5400, SRX5600, and SRX5800 Services Gateways
in Junos OS Release 15.1X49-D10.
Before you begin:
Ensure you have configured the IP address, root authentication, and default route. See
Root Authentication and the Management Interface from the CLI" on page 215
Enable HTTP on the device to access J-Web. See
Interface from the CLI" on page 215
Configure the device with J-Web using the following procedures.
"Configuring Root Authentication and the Management
216
"Configuring