Connector Pinouts For The Srx5600 Services Gateway Routing Engine Auxiliary And Console Ports - Juniper SRX5600 Hardware Manual

Table 53: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port (continued)
Pin
2
3
4
5
6
7
8
RJ-45 Connector Pinouts for the SRX5600 Services Gateway Routing Engine
Auxiliary and Console Ports
The ports on the Routing Engine labeled AUX and CONSOLE are asynchronous serial interfaces that accept
an RJ-45 connector. The ports connect the Routing Engine to an auxiliary or console management device.
Table 54 on page 184 describes the RJ-45 connector pinout.
Table 54: RJ-45 Connector Pinout for the AUX and CONSOLE Ports
Pin Signal
1 RTS
2 DTR
3 TXD
4 Ground
5 Ground
6 RXD
7 DSR/DCD
Signal
TX-
RX+
Termination network
Termination network
RX-
Termination network
Termination network
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
184