Connector Pinouts For The Srx5400 Services Gateway Routing Engine Auxiliary And Console Ports; Table 45: Rj-45 Connector Pinout For The Aux And Console Ports; Port - Juniper SRX5400 Hardware Manual

SRX5400 Services Gateway Hardware Guide
Related
Documentation
RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine Auxiliary
and Console Ports
122
Table 44: RJ-45 Connector Pinout for the Routing Engine ETHERNET
Port (continued)
Pin Signal
4 Termination network
5 Termination network
6 RX-
7 Termination network
8 Termination network
Routing Engine Interface Cable and Wire Specifications for the SRX5400 Services
Gateway on page 124
Connecting the SRX5400 Services Gateway to a Network for Out-of-Band Management
on page 185
The ports on the Routing Engine labeled
interfaces that accept an RJ-45 connector. The ports connect the Routing Engine to an
auxiliary or console management device.
connector pinout.

Table 45: RJ-45 Connector Pinout for the AUX and CONSOLE Ports

Pin Signal
1 RTS
2 DTR
3 TXD
4 Ground
5 Ground
6 RXD
7 DSR/DCD
8 CTS
and are asynchronous serial
AUX CONSOLE
Table 45 on page 122 describes the RJ-45
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
Copyright © 2017, Juniper Networks, Inc.