Connector Pinouts For The Srx5400 Services Gateway Routing Engine Ethernet Port; Connector Pinouts For The Srx5400 Services Gateway Routing Engine Auxiliary And Console Ports - Juniper SRX5400 Hardware Manual

RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine
Ethernet Port
The port on the Routing Engine labeled ETHERNET is an autosensing 10/100-Mbps Ethernet RJ-45
receptacle that accepts an Ethernet cable for connecting the Routing Engine to a management LAN (or
other device that supports out-of-band management).
pinout.
Table 47: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port
Pin
1
2
3
4
5
6
7
8
RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine
Auxiliary and Console Ports
The ports on the Routing Engine labeled AUX and CONSOLE are asynchronous serial interfaces that accept
an RJ-45 connector. The ports connect the Routing Engine to an auxiliary or console management device.
Table 48 on page 166 describes the RJ-45 connector pinout.
Table 48: RJ-45 Connector Pinout for the AUX and CONSOLE Ports
Pin Signal
1 RTS
Table 47 on page 166
Signal
TX+
TX-
RX+
Termination network
Termination network
RX-
Termination network
Termination network
Description
Request to Send
describes the RJ-45 connector
166