Connector Pinouts For The Srx5400 Services Gateway Routing Engine Auxiliary And Console Ports - Juniper SRX5400 Hardware Manual

SRX5400 Services Gateway Hardware Guide
RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine Auxiliary
and Console Ports
Related
Documentation
210
The ports on the Routing Engine labeled
interfaces that accept an RJ-45 connector. The ports connect the Routing Engine to an
auxiliary or console management device.
connector pinout.
Table 40: RJ-45 Connector Pinout for the AUX and CONSOLE Ports
Pin Signal
1 RTS
2 DTR
3 TXD
4 Ground
5 Ground
6 RXD
7 DSR/DCD
8 CTS
Console Port Cable and Wire Specifications for the SRX5400 Services Gateway on
page 208
Connecting the SRX5400 Services Gateway to a Network for Out-of-Band Management
on page 58
and are asynchronous serial
AUX CONSOLE
Table 40 on page 210 describes the RJ-45
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
Copyright © 2014, Juniper Networks, Inc.