Mx2020 Modular Port Concentrator Leds; Mx2020 Modular Interface Card Overview; Mx2020 Modular Interface Card Description; Mx2020 Modular Interface Card (Mic) Leds - Juniper MX2020 Hardware Manual
3d universal edge router
Hide thumbs
Also See for MX2020:
- Hardware manual (630 pages) ,
- Hardware manual (800 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
MX2020 3D Universal Edge Router Hardware Guide
MX2020 Modular Port Concentrator LEDs
Related
Documentation
MX2020 Modular Interface Card Overview
MX2020 Modular Interface Card Description
Related
Documentation
MX2020 Modular Interface Card (MIC) LEDs
24
One bicolor LED located on the craft interface above the MPC, displays the status of the
MPC. For more information about the MPC LEDs on the craft interface, see
Component LEDs on the Craft Interface" on page
Each MPC also has LEDs located on the faceplate. For more information about LEDs on
the MPC faceplate, see the "LEDs" section for each MPC in the
Edge Routers Line Card Guide
MX2020 Modular Port Concentrator Description on page 21
Maintaining MX2020 MPCs on page 168
Troubleshooting the MX2020 MPCs on page 198
Replacing an MX2020 MPC on page 242
MX2020 Modular Interface Card Description on page 24
MX2020 Modular Interface Card (MIC) LEDs on page 24
The Modular Interface Cards (MICs) install into the Modular Port Concentrators (MPCs)
and provide the physical connections to various network media types. MICs allow different
physical interfaces to be supported on a single MPC. The user can install MICs of different
media types on the same MPC as long as the MPC supports those MICs.
MICs receive incoming packets from the network and transmit outgoing packets to the
network. During this process, each MIC performs framing and high-speed signaling for
its media type.
MICs are hot-removable and hot-insertable. The user can install up to two MICs in each
MPC.
MX2020 Modular Interface Card (MIC) LEDs on page 24
Maintaining MX2020 MICs on page 172
Troubleshooting the MX2020 MICs on page 201
Replacing a MX2020 MIC on page 252
Each MIC has LEDs located on the faceplate. For more information about LEDs on the
MIC faceplate, see the "LEDs" section for each MIC in the
.
Routers Line Card Guide
36.
.
"MX2020
MX Series 3D Universal
MX Series 3D Universal Edge
Copyright © 2013, Juniper Networks, Inc.
Advertisement
Chapters
Table of Contents
Troubleshooting
