Communication Parameters Setting - Delta ASDA-B2-F Series User Manual

ASDA-B2-F
8.2 RS-232 Communication Parameters Setting
The following three parameters, P3-00 (Address Setting), P3-01 (Transmission Speed) and
P3-02 (Communication Protocol), are essential and must be set for the communication of the
servo drive. The rest parameters such as P3-03 (Communication Error Disposal), P3-04
(Communication Timeout Setting), P3-06 (Control Switch of Digital Input), P3-07
(Communication Response Delay Time) and P3-08 (Monitor Mode) are optional.
Related parameters: Please refer to Chapter 7 for detailed description.
Parameter
P3-00
P3-01
P3-02
September, 2015
Abbr.
ADR Address Setting
BRT Transmission Speed
PTL Communication Protocol
Function
Communications
8
8-3