Delta ASDA-B2-F Series User Manual page 130

ASDA-B2-F
The setting value which is set by P0-20 should be monitored via P0-12. (Please refer to P0-02)
Users need to access the address via communication port to read the status. Set P0-02 to 26. The
panel displays "VAR-4" first, and then shows the content of P0-12.
P0-13★
Operational
Panel / Software
Interface:
Default: -
Unit: -
Format: DEC
Settings:
The setting value which is set by P0-21 should be monitored via P0-13. (Please refer to P0-02)
Users need to access the address via communication port to read the status.
P0-14~P0-16 Reserved
P0-17
Operational
Panel / Software
Interface:
Default: 0
Unit: -
Format: DEC
Settings:
Please refer to the description of P0-02 for setting value.
For example:
If P0-17 is set to 07, then reading P0-09 means reading "Motor Speed (r / min)".
P0-18
Operational
Panel / Software
Interface:
Default: 0
Unit: -
Format: DEC
Settings:
Please refer to the description of P0-02 for the setting value.
P0-19
Operational
Panel / Software
Interface:
Default: 0
Unit: -
Format: DEC
Settings:
Please refer to the description of P0-02 for the setting value.
P0-20
Operational
Panel / Software
Interface:
Default: 0
Unit: -
Format: DEC
Settings:
Please refer to the description of P0-02 for the setting value.
September, 2015
CM5 Status Monitor Register 5
Communication
CM1A Status Monitor Register 1 Selection
Communication
CM2A Status Monitor Register 2 Selection
Communication
CM3A Status Monitor Register 3 Selection
Communication
CM4A Status Monitor Register 4 Selection
Communication
Address: 001AH
Related
4.3.5
Section:
Control
ALL
Mode:
Range: -
Data Size: 32-bit
Address: 0022H
Related
-
Section:
Control
-
Mode:
Range: 0 ~ 127
Data Size: 16-bit
Address: 0024H
Related
-
Section:
Control
-
Mode:
Range: 0 ~ 127
Data Size: 16-bit
Address: 0026H
Related
-
Section:
Control
-
Mode:
Range: 0 ~ 127
Data Size: 16-bit
Address: 0028H
Related
-
Section:
Control
-
Mode:
Range: 0 ~ 127
Data Size: 16-bit
Parameters
7
001BH
0023H
0025H
0027H
0029H
7-13