Delta ASDA-B2-F Series User Manual page 175

Parameters
P4-16
Operational
Interface:
Default: Factory default
7
Format: DEC
Settings:
Manually adjust the hardware offset. The adjustment function needs to be enabled by the setting of
parameter P2-08. It is not suggested to adjust the auxiliary adjustment. This parameter cannot be
reset.
P4-17
Operational
Interface:
Default: Factory default
Format: DEC
Settings:
Manually adjust the hardware offset. The adjustment function needs to be enabled by the setting of
parameter P2-08. It is not suggested to adjust the auxiliary adjustment. This parameter cannot be
reset.
P4-18
Operational
Interface:
Default: Factory default
Format: DEC
Settings:
Manually adjust the hardware offset. The adjustment function needs to be enabled by the setting of
parameter P2-08. It is not suggested to adjust the auxiliary adjustment. This parameter cannot be
reset.
P4-19
Operational
Interface:
Default: Factory default
Format: DEC
Settings:
Please cool down the drive to 25°C when adjusting.
P4-20~P4-23
P4-24
Operational
Interface:
Default: 160
Format: DEC
Settings:
When the voltage of DC BUS is lower than P4-24*
7-58
COF2 Current Detector (V2 Phase) Offset Adjustment
Panel / Software Communication
Unit: -
COF3 Current Detector (W1 Phase) Offset Adjustment
Panel / Software Communication
Unit: -
COF4 Current Detector (W2 Phase) Offset Adjustment
Panel / Software Communication
Unit: -
IGBT NTC Adjustment Detection Level (cannot
TIGB
reset)
Panel / Software Communication
Unit: -
Reserved
LVL Level of Under Voltage Error
Panel / Software Communication
Unit: V (rms)
Address: 0420H
Related
-
Section:
Control
ALL
Mode:
Range: 0 ~ 32767
Data Size: 16-bit
Address: 0422H
Related
-
Section:
Control
ALL
Mode:
Range: 0 ~ 32767
Data Size: 16-bit
Address: 0424H
Related
-
Section:
Control
ALL
Mode:
Range: 0 ~ 32767
Data Size: 16-bit
Address: 0426H
Related
-
Section:
Control
ALL
Mode:
Range: 1 ~ 4
Data Size: 16-bit
Address: 0430H
Related
-
Section:
Control
ALL
Mode:
Range: 140 ~ 190
Data Size: 16-bit
2
, the under voltage error occurs.
ASDA-B2-F
0421H
0423H
0425H
0427H
0431H
September, 2015