Delta ASDA-B2-F Series User Manual page 247

Appendix A Specifications
ECMA Series
A
Brake Power Consumption
(at 20˚C) [W]
Brake Release Time
[ms (Max)]
Brake Pull-in Time
[ms (Max)]
Vibration Grade (μm)
Operating Temperature (˚C)
Storage Temperature (˚C)
Operating Humidity
Storage Humidity
Vibration Capacity
Note:
*1 The rated torque is the continuous permissible torque between 0~40˚C operating temperature when
attaching with the following heat sink dimension:
ECMA-_ _ 04 / 06 / 08: 250 mm x 250 mm x 6 mm
ECMA-_ _ 10: 300 mm x 300 mm x 12 mm
ECMA-_ _ 13: 400 mm x 400 mm x 20 mm
ECMA-_ _ 18: 550 mm x 550 mm x 30 mm
Material: Aluminum – F40, F60, F80, F100, F130, F180
*2 The built-in brake of the servo motor is for remaining the item in stop status. Do not use it to decelerate
or as the dynamic brake.
*3 For servo motor with magnetic encoder, please refer to the standard specifications of servo motors.
*4 The box (△) in the column stands for encoder type, please refer to Chapter 1 for detailed description.
A-8
05
19.0
10
70
IP65 (when waterproof connectors are used, or when an oil seal is used to be
IP Rating
Approvals
E△13
10 15 20 20
19.0 19.0 19.0 20.4
10 10 10 10
70 70 70 70
15
0 ~ 40
-10 ~ 80
20 ~ 90%RH (non-condensing)
20 ~ 90%RH (non-condensing)
2.5G
fitted to the rotating shaft (an oil seal model is used))
E△18 F△13
30 08 13
20.4 19.0 19.0
10 10 10
70 70 70
ASDA-B2-F
F△18
30
20.4
10
70
September, 2015