Delta ASDA-B2-F Series User Manual page 108

ASDA-B2-F
bigger than 0. If it is, it means the frequency points in P2-43 and P2-45 are the ones found by
auto resonance suppression. If the value is 0, it means the value of 1000 in P2-43 and P2-45 are
default values which are not the ones found by auto resonance suppression. Deepen the
attenuation rate of the non-existed frequency point might worsen the situation.
Current Value
0
0
1
1
1
2
2
2
September, 2015
Settings of P2-47
Desired Value
Clear the setting value of P2-43 ~ P2-46 and enable the
1
function of auto resonance suppression.
Clear the setting value of P2-43 ~ P2-46 and enable the
2
function of auto resonance suppression.
Save the setting value of P2-43 ~ P2-46 and disable the
0
function of auto resonance suppression.
Clear the setting value of P2-43 ~ P2-46 and enable the
1
function of auto resonance suppression.
Do not clear the setting value of P2-43 ~ P2-46 and enable the
2
function of auto resonance suppression continuously.
Save the setting value of P2-43 ~ P2-46 and disable the
0
function of auto resonance suppression.
Clear the setting value of P2-43 ~ P2-46 and enable the
1
function of auto resonance suppression.
Do not clear the setting value of P2-43 ~ P2-46 and enable the
2
function of auto resonance suppression continuously.
Control Mode of Operation
Function
6
6-19