Delta ASDA-B2-F Series User Manual page 179

Parameters
P5-31
Operational
Interface:
Default: 3000
7
Format DEC
Settings:
Please refer to P5-20 for the setting of acceleration / deceleration time in DMCNET mode.
P5-32
Operational
Interface:
Default: 5000
Format DEC
Settings:
Please refer to P5-20 for the setting of acceleration / deceleration time in DMCNET mode.
P5-33
Operational
Interface:
Default: 8000
Format DEC
Settings:
Please refer to P5-20 for the setting of acceleration / deceleration time in DMCNET mode.
P5-34
Operational
Interface:
Default: 50
Format DEC
Settings:
The default value of this parameter is smaller (short deceleration time) and it is used for deceleration
time setting of auto protection.
P5-35
Operational
Interface:
Default: 30
Format: DEC
Settings:
The default value of this parameter is smaller (short deceleration time) and it is used for deceleration
time setting of auto protection.
Note:
The default value of this parameter is smaller, which can be used in high-speed deceleration.
7-62
AC11 Acceleration / Deceleration Time (Number #11)
Panel / Software Communication
Unit: ms
AC12 Acceleration / Deceleration Time (Number #12)
Panel / Software Communication
Unit: ms
AC13 Acceleration / Deceleration Time (Number #13)
Panel / Software Communication
Unit: ms
AC14 Acceleration / Deceleration Time (Number #14)
Panel / Software Communication
Unit: ms
AC15 Acceleration / Deceleration Time (Number #15)
Panel / Software Communication
Unit: ms
Address: 053EH
Related
-
Section:
Control
DMCNET
Mode:
Range: 1 ~ 65500
Data Size: 16-bit
Address: 0540H
Related
-
Section:
Control
DMCNET
Mode:
Range: 1 ~ 65500
Data Size: 16-bit
Address: 0542H
Related
-
Section:
Control
DMCNET
Mode:
Range: 1 ~ 65500
Data Size: 16-bit
Address: 0544H
Related
-
Section:
Control
DMCNET
Mode:
Range: 1 ~ 1500
Data Size: 16-bit
Address: 0546H
Related
-
Section:
Control
DMCNET
Mode:
Range: 1 ~ 1200
Data Size: 16-bit
ASDA-B2-F
053FH
0541H
0543H
0545H
0547H
September, 2015