Parameters
Setting Value: 0x23
DI Name
PL
(CCWL)
7
Setting Value: 0x24
DI Name
ORGP
7-64
Function Description of Digital Input (DI)
Forward inhibit limit (contact b)
Function Description of Digital Input (DI)
In DMCNET mode, if this DI is ON during the process of homing, the
servo will regard the current position as the homing origin (Please
refer to the setting of parameter P5-04)
ASDA-B2-F
Trigger
Control
Method
Mode
Level
ALL
triggered
Trigger
Control
Method
Mode
Rising /
Falling
DMCNET
edge
triggered
September, 2015