Delta ASDA-B2-F Series User Manual page 162

ASDA-B2-F
P2-35
Operational
Panel / Software
Interface:
Default: 3840000
Unit: Pulse
Format: DEC
Settings:
It is the setting of excessive position control deviation warning in servo drive error display (P0-01).
P2-36~P2-42 Reserved
P2-43
Operational
Panel / Software
Interface:
Default: 1000
Unit: Hz
Format: DEC
Settings:
The second setting value of resonance frequency. If P2-44 is set to 0, this function is disabled.
P2-23 and P2-24 are the first group of notch filter.
P2-44
Operational
Panel / Software
Interface:
Default: 0
Unit: -dB
Format: DEC
Settings:
The second resonance suppression (notch filter) attenuation rate. When this parameter is set to 0,
the function of notch filter is disabled.
Note:
If the value of attenuation rate is set to 5, then, it would be -5 dB.
P2-45
Operational
Panel / Software
Interface:
Default: 1000
Unit: Hz
Format: DEC
Settings:
The third setting value of resonance frequency. If P2-46 is set to 0, this function is disabled. P2-23
and P2-24 are the first group of notch filter.
P2-46
Operational
Panel / Software
Interface:
Default: 0
Unit: -dB
Format: DEC
Settings:
The third resonance suppression (notch filter) attenuation rate. When this parameter is set to 0, the
function of notch filter is disabled. If the value of attenuation rate is set to 5, then, it would be -5 dB.
September, 2015
Condition of Excessive Position Control
PDEV
Deviation Warning
Communication
NCF2 Resonance Suppression (Notch Filter) (2)
Communication
Resonance Suppression (Notch Filter)
DPH2
Attenuation Rate (2)
Communication
NCF3 Resonance Suppression (Notch Filter) (3)
Communication
Resonance Suppression (Notch Filter)
DPH3
Attenuation Rate (3)
Communication
Address: 0246H
Related
-
Section:
Control
DMCNET
Mode:
Range: 1 ~ 128000000
Data Size: 32-bit
Address: 0256H
Related
6.3.6
Section:
Control
ALL
Mode:
Range: 50 ~ 2000
Data Size: 16-bit
Address: 0258H
Related
6.3.6
Section:
Control
ALL
Mode:
0 ~ 32 (0: Disable the function of
Range:
notch filter)
Data Size: 16-bit
Address: 025AH
Related
6.3.6
Section:
Control
ALL
Mode:
Range: 50 ~ 2000
Data Size: 16-bit
Address: 025CH
Related
6.3.6
Section:
Control
ALL
Mode:
Range: 0 ~ 32
Data Size: 16-bit
Parameters
0247H
7
0257H
0259H
025BH
025DH
7-45