Toyota Avensis ZZT251 2003 Service And Repair Manual page 252

10–36
18. INSTALL INTAKE MANIFOLD INSULATOR NO.1
19. INSTALL INTAKE MANIFOLD
(a) Install a new gasket to the intake manifold.
(b) Install the intake manifold with the 5 bolts and 2 nuts.
Torque: 30 N m (306 kgf cm, 22 ft lbf)
(c) Install the wire harness clamp.
(d) Connect the union to connector tube hose.
20. CONNECT HEATER INLET WATER HOSE
21. INSTALL CHARCOAL CANISTER ASSY
22. INSTALL VARIABLE RESISTOR (LHD STEERING POSITION TYPE, LEADED GASOLINE)
Torque: 5.0 N m (51 kgf cm, 44 in. lbf)
23. INSTALL FUEL DELIVERY PIPE SUB–ASSY
24. CONNECT FUEL TUBE SUB–ASSY
25. INSTALL THROTTLE BODY ASSY
26. INSTALL ACCELERATOR CONTROL CABLE ASSY
27. INSTALL AIR CLEANER CAP SUB–ASSY
28. ADD ENGINE COOLANT
29. CHECK FOR ENGINE COOLANT LEAKS
30. CHECK FOR FUEL LEAKS
31. INSTALL ENGINE COVER SUB–ASSY NO.1
32. INSTALL ENGINE ROOM COVER SIDE
33. INSTALL RADIATOR SUPPORT OPENING COVER
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE CONTROL SYSTEM
(See page
(See page
(See page 16–19)
(See page
(See page 11–19)
http://vnx.su
– KNOCK SENSOR (1AZ–FE)
(See page 11–26)
11–26)
10–26)
(See page 10–26)
16–13)
(See page 10–26)