Table of Contents
Advertisement
LHD:
RHD:
(b)
Upper
10Y
10Y
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE CONTROL SYSTEM
14.
REMOVE INTAKE MANIFOLD
(a)
Disconnect the union to connector tube hose.
A77920
(b)
Remove the wire harness clamp.
(c)
Remove the 5 bolts and 2 nuts, and then remove the in-
take manifold.
(d)
Remove the gasket from the intake manifold.
A77921
15.
REMOVE INTAKE MANIFOLD INSULATOR NO.1
A77922
16.
REMOVE KNOCK SENSOR
(a)
Disconnect the knock sensor connector.
(b)
Remove the nut, and then remove the knock sensor.
A78435
17.
INSTALL KNOCK SENSOR
(a)
Install the knock sensor with the nut as shown in the il-
lustration.
Torque: 20 N m (204 kgf cm, 15 ft lbf)
Engine
(b)
Connect the knock sensor connector.
Front
A78436
http://vnx.su
–
KNOCK SENSOR (1AZ–FE)
10–35
Advertisement
Table of Contents
