Avaya WLAN 8100 Series Reference page 84

ACLI reference for Wireless LAN (WLAN) 8100
8. Repeat Step 6 and Step 7.
9. After you determine the optimal Association and Roaming zone thresholds, you can
Configuring Wi-Fi Zoning on an AP using a radio profile
Configure Wi-Fi Association Zone and Roaming Zone RSSI thresholds for AP Radios, using
a radio profile.
Before you begin
Ensure that you are in the wireless configuration mode.
• Execute the following commands:
WC8180#conf t
WC8180(config)#wireless
WC8180(config-wireless)#
About this task
Use this procedure to create a sample radio profile and enable Wi-Fi association zone and
roaming zone thresholds on that profile.
Procedure
1. Create a radio profile named rp_WiFiZone with profile ID 20.
2. Verify creation of the radio profile.
84 Avaya WLAN 8100 CLI Reference
In this example, 33:FF:44:35:55:6F is a sample AP MAC address.
WC8180#wireless ap power 33:FF:44:35:55:6F 1 ?
<1-100> Radio Power in percentage
save-to-db Save power settings of the managed AP into domain DB
configure the AP in your deployment with the lowest cut-off values for these
thresholds. You can apply this configuration to a single AP or to all APs in your
deployment.
WC8180(config-wireless)#radio-profile 20
access-wids Create a radio profile with access-wids operation mode
ap-model Hardware model
country-code Create a radio profile with a country code
wids-wips Create a radio profile with wids-wips operation mode
Entering radio-profile (id = 20) configuration mode...
WC8180(config-radio-profile)#
WC8180(config-wireless)#radio-profile 20 ap-model ap8120/E country-code
US access-wids a-n
Note:
Auto tune the locked channel and power of the radio profile, by configuring the
channel and power in auto mode in domain AP database.
WC8180(config-radio-profile)#show wireless radio-profile 20
Comments? infodev@avaya.com
August 2013