Avaya WLAN 8100 Series Reference page 234

ACLI Reference for wired networks
ssh command
The ssh command enables SSH in a non secure mode. If the host keys do not exist, they are
generated.
The syntax for the ssh command is:
ssh
The ssh command is executed in the Global Configuration mode.
This command has no parameters.
no ssh command
The no ssh command disables SSH.
The syntax for the no ssh command is:
no ssh {dsa-auth|dsa-auth-key|dsa-host-key|pass-auth}
The following table describes the parameters for this command.
Table 76: no ssh command parameters
dsa-auth
dsa-auth-key
dsa-host-key
pass-auth
The no ssh command is executed in the Global Configuration mode.
ssh secure command
The ssh secure command disables web, SNMP, and Telnet management interfaces
permanently.
The no ssh command does NOT turn them back on; they must be re-enabled manually. A
warning message is issued to the user to enable one of the other interfaces before turning off
SSH secure mode.
The syntax for the ssh secure command is:
ssh secure
The ssh secure command is executed in the Global Configuration mode.
ssh dsa-auth command
The ssh dsa-auth command enables the user log on using DSA key authentication.
The syntax for the command is:
234 Avaya WLAN 8100 CLI Reference
Parameter
Comments? infodev@avaya.com
Description
Disable SSH DSA authentication.
Delete SSH DSA auth key.
Delete SSH DSA host key.
Disable SSH password authentication.
August 2013