Avaya WLAN 8100 Series Reference page 32

Cli reference
Hide thumbs Also See for WLAN 8100 Series:
Table of Contents

Advertisement

ACLI reference for Wireless LAN (WLAN) 8100
11. Use the command captive portal profile <profile_number> max-
12. Use the command captive portal profile <profile_number>
13. Use the command captive portal profile <profile_number>
14. Use the command captive portal profile <profile_number>
15. Use the command captive portal profile <profile_number>
16. Use the command captive portal profile <profile_number>
17. Use the command captive portal profile <profile_number> user-
18. Use the command walled-garden to enter the Captive Portal Walled Garden
32
Avaya WLAN 8100 CLI Reference
Command options:
WCP8180(config-cp-profile)#max-bandwidth ?
down
Set receive bandwidth limit
up
Set transmit bandwidth limit
WCP8180(config-cp-profile)#max-bandwidth down ?
<0-4294967295>
Bandwidth in bits per second
WCP8180(config-cp-profile)#max-bandwidth up ?
<0-4294967295>
Bandwidth in bits per second
octets to configure the maximum session octets.
Command options:
WCP8180(config-cp-profile)#max-octets ?
input
Set max input octets per session
output
Set max output octets per session
total
Set max total octets per session
WCP8180(config-cp-profile)#max-octets input ?
<0-4294967295>
Enter max allowed in bytes
profile-name to set the profile name.
protocol-mode to set the protocol mode.
Command options:
WCP8180(config-cp-profile)#protocol-mode ?
http
HTTP mode
https
HTTPS mode
redirect enable HTTP redirect mode after authentication.
redirect-url to configure the redirect URL.
For more information, see
session-timeout to set the session timeout value. Enter a time in seconds. The
range is 0 to 2100000000.
logout to enable user logout.
host-name configuration mode.
Sometimes, a Captive Portal user may need to access network resources in the
intranet or public Web sites from an enterprise network, without requiring to first
undergo Captive Portal authentication. To support these user requirements, the
WLAN 8100 allows configuration of the IP addresses of Web hosts in a Captive
Portal profile so that the user can access these hosts without the need for
authentication. This is the Captive Portal Walled Garden feature.
Comments? infodev@avaya.com
Redirecting the URL for captive portals
on page 34.
August 2013

Advertisement

Table of Contents
loading

Table of Contents