Avaya WLAN 8100 Series Reference page 72

Cli reference
Hide thumbs Also See for WLAN 8100 Series:
Table of Contents

Advertisement

ACLI reference for Wireless LAN (WLAN) 8100
Source L4 Port
Destination L4 Port
Destination IP Address
IPDSCP
(Optional)
IP Precedence
(Optional)
IP TOS Bits
(Optional)
72
Avaya WLAN 8100 CLI Reference
Criteria
Specifies the packet's TCP/UDP source port as the match
condition.
Enter a user-defined Port ID to compare with the packet's
TCP/UDP source port.
Specifies the packet's TCP/UDP destination port as the
match condition.
Enter a user-defined Port ID to compare with the packet's
TCP/UDP destination port.
Specifies a packet's destination port IP address as the match
condition.
The address you enter is compared to a packet's destination
IP Address. You must also configure the Destination IP Mask
with the Destination IP Address.
Specifies the packet's IP DiffServ Code Point (DSCP) value
as the match condition for the rule.
The DSCP is defined as the high-order six bits of the Service
Type octet in the IP header. Enter an integer from 0 to 63.
Either the DSCP value, the IP Precedence value or the IP
Tos value is used to match packets to ACLs.
Specifies the packet's IP Precedence value as the match
condition for the rule.
The IP Precedence field in a packet is defined as the high-
order three bits of the Service Type octet in the IP header.
Enter the IP Precedence value as an integer in the range 0–
7. Either the DSCP value or the IP Precedence value or IP
Tos value is used to match packets to ACLs.
Specifies the packet's IP Tos value as the match condition
for the rule.
The IP TOS field in a packet is defined as all eight bits of the
Service Type octet in the IP header. Matches on the Type of
Service bits in the IP header when checked.
For example, to check for an IP TOS value having bits
5
set and bit
TOS Bits value of
• TOS Bits:
This value is a hexadecimal number from
Requires the bits in a packet's TOS field to match the two-
digit hexadecimal number that you enter.
• TOS Mask:
This value is a hexadecimal number from
Specifies the bit positions that are used for comparison
against the IP TOS field in a packet.
Comments? infodev@avaya.com
Description
1
clear, where bit
7
is most significant, use a
0xA0
and a TOS Mask of
7
and
0xFF
.
00
to
FF
.
00
to
FF
.
August 2013

Advertisement

Table of Contents
loading

Table of Contents