Avaya WLAN 8100 Series Reference page 332

ACLI Reference for wired networks
non-ip
unknown-ucast
pattern-format { tagged | untagged } Specifies the format of data/mask pattern. Specifies
pattern-data <WORD>
pattern-l2–version
pattern-ip-version
session-id
unknown-ip-mcast
unknown-non-ip-mcast
Viewing system classifier elements parameters
About this task
View system classifier elements parameters by performing this procedure.
Procedure
View system classifier elements parameters by using the following commands from
the Privileged EXEC Configuration mode.
show qos system-element [<1-65535>] [all] [system] [user]
Use the data in the following table to use show qos system– element command.
<1–65535>
332 Avaya WLAN 8100 CLI Reference
Variable
Variable definitions
Variable
Comments? infodev@avaya.com
Value
Matches the non-IP frames.
Matches the Filter on unknown unicast destination
address.
the available values are:
• tagged— Data/mask pattern describes a tagged
packet
• untagged—Data/mask pattern describes an
untagged packet
Specifies the byte pattern data to filter on.
Note: The format of the WORD string is in the form of
XX:XX:XX:....:XX.
Specifies the L2 format of the pattern data/mask.
Specifies the IP version of the pattern data or mask.
• ipv4—Filter IPv4 Header
• non-ip—Filter non-ip packets
Specifies the session ID.
Matches frames containing an unknown IP multicast
destination address.
Matches frames containing an unknown non-IP
multicast destination address.
Description
Displays the specified system classifier element
entries.
August 2013