Avaya WLAN 8100 Series Reference page 317

QoS Agent configuration
Configuring Default Buffering Capabilities
Configuring the CoS-to-Queue Assignments
Configuring QoS Interface Groups
Configuring DSCP and 802.1p and Queue Associations
Configuring QoS system-element
Configuring QoS Actions
Configuring QoS Interface Action Extensions
Configuring QoS Meters
Configuring QoS Interface Shaper
Configuring QoS Policies
QoS Generic Filter set configuration
Configuring User Based Policies
Maintaining the QoS Agent
Configuring DoS Attack Prevention Package
Displaying QoS Parameters
About this task
Display QoS parameters by performing this procedure.
Procedure
Display QoS parameters by using the following command from Privileged EXEC
mode.
show qos { acl-assign <1 - 65535> | action [user | system | all
| <1-65535>] | agent [details]| bpdu {blocker [port] } |
capability [meter|shaper] | classifier [user | system | all |
<1-65535>] | classifier-block [user | system | all |<1-65535> ]
| dhcp {snooping [port] | spoofing [port] } | diag [unit] | dos
{nachia [port] | sqlslam [port] | tcp-dnsport [port] |
egressmap [ds| status]| if-action-extension [user | system |
all | <1-65535>] | if-assign [port] | if-group | if-shaper
[port] | ingressmap | ip-acl <1 - 65535> | ip-element [user |
system | all | <1-65535>] | l2-acl <1 - 65535> | l2-element
[user | system | all | <1-65535>] | meter [user | system | all
| <1-65535>] | nsna | policy [user | system | all | <1-65535>]
| queue-set | queue-set-assignment | statistics <1-65535> |
system-element [user | system | all |<1-65535>] | ubp | user-
policy}
Avaya WLAN 8100 CLI Reference
on page 321
on page 323
on page 325
on page 326
on page 331
on page 333
on page 335
on page 336
on page 337
on page 339
on page 341
on page 343
on page 346
on page 349
ACLI reference for wired networks
on page 328
August 2013 317