Avaya WLAN 8100 Series Reference page 298

ACLI Reference for wired networks
Querier
Query MaxRsp T
Wrong Query
Joins
Robust
LastMbr Query
Send Query
The following table shows the field descriptions for the show vlan igmp <Vlan Id>
command.
VLAN ID
Snooping
Proxy
Robust Value
Query Time
IGMPv1 Static Router Ports
IGMPv2 Static Router Ports
298 Avaya WLAN 8100 CLI Reference
Field
Specifies the IP address of the IGMP querier on the IP
subnet to which this interface is attached.
Indicates the maximum query response time (in tenths of
a second) advertised in IGMPv2 queries on this interface.
Indicates the number of queries received whose IGMP
version does not match the Interface version. You must
configure all routers on a LAN to run the same version of
IGMP. Thus, if queries are received with the wrong version,
a configuration error occurs.
Indicates the number of times a group membership was
added on this interface.
Specifies the robust value configured for expected packet
loss on the interface.
Indicates the maximum response time (in tenths of a
second) inserted into group-specific queries sent in
response to leave group messages, and is also the amount
of time between group-specific query messages. Use this
value to modify the leave latency of the network. A reduced
value results in reduced time to detect the loss of the last
member of a group. This does not apply if the interface is
configured for IGMPv1.
Indicates whether the ip igmp send-query feature is
enabled or disabled. Values are YES of NO. Default is
disabled.
Field
Comments? infodev@avaya.com
Description
Description
Displays the VLAN Id
Indicates whether snooping is enabled or disabled.
Indicates whether proxy snoop is enabled or
disabled.
Indicates the robust value configured for expected
packet loss on the interface.
Indicates the frequency (in seconds) at which host
query packets are transmitted on the interface.
Indicates the IGMPv1 static mrouter ports.
Indicates the IGMPv2 static mrouter ports.
August 2013