ssh dsa-host-key
The command is executed in the Global Configuration mode.
The ssh dsa-host-key command has no parameters or variables.
no ssh dsa-host-key command
The no ssh dsa-host-key command deletes the DSA keys in the switch. A new DSA key
can be generated by executing dsa-host-key or SSH enable commands.
The syntax for the no ssh dsa-host-key command is:
no ssh dsa-host-key
The no ssh dsa-host-key command is executed in the Global Configuration mode.
The no ssh dsa-host-key command has no parameters or variables.
ssh download-auth-key command
The ssh download-auth-key command downloads the DSA authentication key into the
switch from the specified TFTP server or from the USB stick, if available.
The syntax for the ssh download-auth-key command is:
ssh download-auth-key [address] [<key-name>] [usb]
The following table describes the parameters for this command.
Table 75: ssh download-auth-key command parameters
address
key-name
usb
The ssh download-auth-key command is executed in the Global Configuration mode.
no ssh dsa-auth-key command
The no ssh dsa-auth-key command deletes the DSA authentication key stored in the
switch.
The syntax for the no ssh dsa-auth-key command is:
no ssh dsa-auth-key
The no ssh dsa-auth-key command is executed in the Global Configuration mode.
Avaya WLAN 8100 CLI Reference
Parameter
Description
Specify the TFTP server IP address.
Specify the TFTP/USB file name.
Specify whether download SSH auth key from the
USB stick.
Available only if the device has USB port.
ACLI reference for wired networks
August 2013
233