Job Aid; Configuring Dhcp Relay Status And Parameters On A Vlan - Avaya WLAN 8100 Series Reference

Displaying the DHCP relay configuration
About this task
Use this procedure to display the current DHCP relay agent configuration.
Procedure
To display the DHCP relay configuration, enter the following from the User EXEC
command mode:
show ip dhcp-relay fwd-path

Job aid

The following table shows the field descriptions for the show ip dhcp-relay fwd-path
command.
INTERFACE
SERVER
ENABLE
MODE

Configuring DHCP relay status and parameters on a VLAN

About this task
Use this procedure to configure the DHCP relay parameters on a VLAN. To enable DHCP relay
on the VLAN, enter the command with no optional parameters.
Procedure
To configure DHCP relay on a VLAN, enter the following from the VLAN Interface
Configuration mode:
[no] ip dhcp-relay [broadcast] [min-sec <min-sec>] [mode {bootp
| dhcp | bootp_dhcp}]
Avaya WLAN 8100 CLI Reference
Variable
Field
Specifies the interface IP address of the DHCP relay
agent.
Specifies the IP address of the DHCP server.
Specifies whether DHCP is enabled.
Specifies the DHCP mode.
Value
• BootP only
• BootP and DHCP
• DHCP only
If you do not specify a mode, the default DHCP
and BootP is used.
Description
ACLI reference for wired networks
August 2013 283