Avaya WLAN 8100 Series Reference page 121

2. Use the following commands to create or modify the controller load-balance location
3. Use the following commands to configure the load balancing metric (least-
4. Use following commands to configure the C.B.F.S parameters for an AP or WSP
Avaya WLAN 8100 CLI Reference
database for a specific controller (specified by the MAC address).
WCP8180(config-wireless-lb)#controller ?
H.H.H Controller MAC to create/modify the controller load-balance
location-db
WCP8180(config-wireless-lb)#controller 00:1B:4F:6A:18:E1 location ?
WORD Enter campus string (limit: 1-8 chars)
WCP8180(config-wireless-lb)#controller 00:1B:4F:6A:18:E1 location <campus-
name> ?
WORD Enter building string (limit: 1-8 chars)
WCP8180(config-wireless-lb)#controller 00:1B:4F:6A:18:E1 location <campus-
name> <building-name> ?
WORD Enter floor string (limit: 1-8 chars)
WCP8180(config-wireless-lb)#controller 00:1B:4F:6A:18:E1 location <campus-
name> <building-name> <floor-name> ?
WORD Enter sector string (limit: 1-8 chars)
<cr>
WCP8180(config-wireless-lb)#$:44:55 location <campus-name> <building-
name> <floor-name> <sector-name>
load or location) for APs and WSPs.
Note:
Wireless Switching Point (WSP) load balancing is applicable only in Unified
Access deployments.
Choose the load balancing metric:
WCP8180(config-wireless-lb)# lb-metric ?
least-load Load balance to the least loaded device
location Load balance to the device in the nearest location(C.B.F.S)
for location-based load balancing.
Note:
The Campus, building and floor parameters are mandatory but the sector name
is optional.
C.B.F.S parameter configuration for APs:
WCP8180(config-wireless)#domain ap 00:1B:4F:6A:18:E0
Entering domain AP (mac = 00:1B:4F:6A:18:E0) configuration mode...
WCP8180(config-domain-ap)#location ?
WORD Enter campus string (limit: 1-8 chars)
WCP8180(config-domain-ap)#location <campus-string> ?
WORD Enter building string (limit: 1-8 chars)
WCP8180(config-domain-ap)#location <campus-string> <Building-string> ?
WORD Enter floor string (limit: 1-8 chars)
WCP8180(config-domain-ap)#location <campus-string> <Building-string>
<floor-string> ?
ACLI reference for the Wireless LAN (WLAN) 8100
August 2013 121