Avaya WLAN 8100 Series Reference page 206

ACLI Reference for wired networks
Disable the RADIUS password fallback feature by using one of the following commands in
Global or Interface Configuration mode:
no radius-server
default radius-server
The command erases settings for the RADIUS primary and secondary servers and secret key,
and restores default RADIUS settings.
Viewing RADIUS information
About this task
Display RADIUS configuration status by using the following command from any mode:
show radius-server
SNMP configuration using CLI
Use the following commands to configure SNMP to monitor devices running software that
supports the retrieval of SNMP information, using the CLI.
Related topics:
Configuring SNMP v1, v2c, v3 Parameters using CLI
SNMPv3 table entries stored in NVRAM
show snmp-server command
snmp-server community for read or write command
snmp-server community command
no snmp-server community command
default snmp-server community command
no snmp-server contact command
default snmp-server contact command
snmp-server command
no snmp-server command
snmp-server host command
show snmp-server host command
no snmp-server host command
default snmp-server host command
snmp-server location command
no snmp-server location command
default snmp-server location command
snmp-server name command
no snmp-server name command
default snmp-server name command
206 Avaya WLAN 8100 CLI Reference
on page 208
on page 208
on page 209
on page 210
on page 211
on page 211
on page 211
on page 211
on page 212
on page 212
on page 213
on page 214
on page 215
on page 215
on page 215
on page 215
on page 216
on page 216
on page 216
Comments? infodev@avaya.com
on page 207
on page 209
August 2013