Avaya WLAN 8100 Series Reference page 335

Note: An action cannot be deleted if referenced by a policy, classifier block, or meter.
Procedure
Delete QoS action entries by using the following command from Global Configuration
mode.
no qos action <10-55000>
Configuring QoS Interface Action Extensions
About this task
QoS interface action extensions direct the WC 8180 to take specific action on each packet.
Related topics:
Creating interface action extension entries
Removing interface action extension entries
Creating interface action extension entries
About this task
Use the following procedure to create interface action extension entries.
Note: An interface extension that is referenced in an action entry cannot be deleted.
Procedure
1. Create interface action extension entries by using the following command from
2. View the interface action extension entries by using the following command:
<1-55000>
name <WORD>
egress-ucast <port> | egress-non-
ucast <port>
session-id
Avaya WLAN 8100 CLI Reference
Global Configuration mode.
qos if-action-extension <1-55000> [name <WORD>] {egress-ucast
<port> | egress-non-ucast <port>}
show qos if-action-extension <1–65535> [all] [system] [user]
Variable definitions
Variable
on page 335
on page 336
Value
Specifies the QoS action. The range is 1–55000
Assigns a name to a QoS action with the designated
action ID. Enter the name for the action; maximum is
16 alphanumeric characters
Specifies redirection of unicast/non-unicast to
specified port.
Specifies the session id for QoS action.
ACLI reference for wired networks
August 2013 335