Avaya WLAN 8100 Series Reference page 79

3. Enable Ekahau support on the AP profile.
4. Verify that Ekahau support is enabled.
5. Use the following command to configure the Ekahau server IP address.
6. Use the following command to configure the Ekahau server UDP port.
7. Optionally, to disable Ekahau support, use the following command:
Avaya WLAN 8100 CLI Reference
Sample Output:
AP Profile Id: 2
Name
Country Code
AP Model
Is Default Profile?
Ekahau Protocol Support : Disable
Ekahau Tag Blink Mode
Ekahau Server IP
Ekahau Server UDP Port
Status
Note:
By default Ekahau support is disabled on the AP profile.
WC8180(config-wireless)#ap-profile 2
Entering ap-profile (id = 2) configuration mode..
WC8180(config-ap-profile)#ekahau enable
WC8180#show wireless ap-profile 2 detail
Sample Output:
AP Profile Id: 2
Name
Country Code
AP Model
Is Default Profile?
Ekahau Protocol Support : Enable
Ekahau Tag Blink Mode
Ekahau Server IP
Ekahau Server UDP Port
Status
In the following example, 10.11.2.31 is a sample Ekahau server IP address.
WC8180#(config-ap-profile)#ekahau server-ip 10.11.2.31
The following command resets the Ekahau server IP address to the default value
0.0.0.0.
WC8180(config-ap-profile)# default ekahau server ip
In the following example, the server port is configured as 8000.
WC8180#(config-ap-profile)#ekahau server-port 8000
The following command resets the Ekahau server port to the default value 8569.
WC8180(config-ap-profile)# default ekahau server port
WC8180(config-ap-profile)# default ekahau enable
ACLI reference for the Wireless LAN (WLAN) 8100
: AP-Profile-1
: IN
: Avaya APs (AP8120/AP8120-E)
: No
: Disable
: 0.0.0.0
: 8569
: Associated
: AP-Profile-1
: IN
: Avaya APs (AP8120/AP8120-E)
: No
: Enable
: 0.0.0.0
: 8569
: Associated & modified
August 2013 79