Avaya WLAN 8100 Series Reference page 151

WCP8180(config-security)#
Table 8: show interfaces command parameters
Parameters
names <portlist>
Configuring Interface Options
About this task
Use the following procedure to configure Fast Ethernet and Layer 3 IP VLAN options.
Procedure
1. Enter Privileged mode of the CLI.
2. Enter Configuration mode by entering the config command.
3. Use the command interface FastEthernet <list of ports> to set the
4. Use the command interface vlan <1–4094> to assign the Layer 3 IP VLAN ID.
Enabling Jumbo Frames
About this task
Use the following procedure to enable Jumbo Frames
Procedure
1. Enter Privileged mode of the CLI.
2. Enter Configuration mode by entering the config command.
3. Use the command jumbo-frames enable to enable Jumbo Frames.
Configuring the EDM Help File Path
About this task
Use the following procedure to change the location of EDM help files
Procedure
1. Enter Privileged mode of the CLI.
2. Enter Configuration mode by entering the config command.
Avaya WLAN 8100 CLI Reference
Displays the interface names; enter specific ports if you
want to see only those.
list of ports to support Fast Ethernet.
ACLI reference for wired networks
Description
August 2013 151