Avaya WLAN 8100 Series Reference page 190

ACLI Reference for wired networks
web-server command
The web-server command enables or disables the web server used for Web-based
management.
The syntax for the web-server command is:
web-server {enable | disable}
The web-server command is executed in the Global Configuration command mode.
The following table describes the parameters for this command.
Table 38: web-server command parameters
Parameter
enable | disable
no web-server command
The no web-server command disables the web server used for Web-based
management.
The syntax for the no web-server command is:
no web-server
The no web-server command is executed in the Global Configuration command mode.
Setting the read-only and read-write passwords
About this task
The first step to requiring password authentication when the user logs in to the switch is to edit
the password settings. To set the read-only and read-write passwords, perform the following
procedure.
Procedure
1. Access CLI through the Telnet protocol or a Console connection.
2. From the command prompt, use the cli password command to change the desired
190 Avaya WLAN 8100 CLI Reference
Enables or disables the web server.
password.
cli password {read-only | read-write} <password>
The following table describes the parameters for this command.
Comments? infodev@avaya.com
Description
August 2013