Avaya WLAN 8100 Series Reference page 264

ACLI Reference for wired networks
Procedure
To display port debug information, use the following command from Privileged EXEC
mode.
show lacp debug member [<portList>]
About this task
Use the following procedure to display LACP aggregators or LACP trunks.
Procedure
To display aggregators, use the following command from Privileged EXEC mode.
show lacp aggr <1-65535>
About this task
Use the following procedure to configure the LACP system priority. It is used to set the system-
wide LACP priority. The factory default priority value is 32768.
Procedure
To configure system priority, use the following command from Global Configuration
mode.
lacp system-priority <0-65535>
About this task
Use the following procedure to enable the port aggregation mode.
Procedure
To enable the port aggregation mode, use the following command from Interface
Configuration mode.
[no] lacp aggregation [port <portList>] enable
Use the no form of the command to disable.
About this task
Use the following procedure to configure the administrative LACP key for a set of ports.
264 Avaya WLAN 8100 CLI Reference
Displaying LACP aggregators
Configuring LACP system priority
Enabling LACP port aggregation mode
Configuring the LACP administrative key
Comments? infodev@avaya.com
August 2013