Avaya WLAN 8100 Series Reference page 127

Cli reference
Hide thumbs Also See for WLAN 8100 Series:
Table of Contents

Advertisement

2. Perform the following steps to configure load balancing using the least-load
Avaya WLAN 8100 CLI Reference
APs load-balanced to WC
--------------------------------------------------------------------
g. Verify that the APs are distributed based on their location.
After load-balancing, the APs that are located on the first floor are managed by
the controller on the first floor. Similarly, APs on the second floor are managed
by the controller on the second floor.
WC8180#show wireless domain load-balance ap-lb-table
Load Balancing Metric: location
-----------------------------------------------------------------
AP MAC Address
----------------- --------------- --------------- ---------------
00:1B:4F:6A:18:E1 172.16.2.101
00:1B:4F:6A:18:E2 172.16.2.102
00:1B:4F:6A:18:E3 172.16.2.103
00:1B:4F:6A:18:E4 172.16.2.104
-----------------------------------------------------------------
metric.
Important:
Ensure that CBFS parameters are not configured on either the controller or APs.
Otherwise, the system load-balances the APs using only the location-
based metric by default, even if the load-balancing metric is configured as
least-load.
a. View the current load balance status on the controllers WC1 and WC2 as
follows.
The system displays the current load balancing metric as Location.
Load-balance status on WC1:
WC8180#show wireless domain load-balance status
Mobility Domain AP License
Mobility Domain AP License In Use
Configured Load Balancing Metric
Domain Load Balance Status per Method:
--------------------------------------------------------------------
---------------
APs load-balanced to WC
--------------------------------------------------------------------
Load-balance status on WC2:
WC8180#show wireless domain load-balance status
Mobility Domain AP License
Mobility Domain AP License In Use
Configured Load Balancing Metric
Domain Load Balance Status per Method:
--------------------------------------------------------------------
---------------
ACLI reference for the Wireless LAN (WLAN) 8100
0
AP IP
WC IP
192.168.18.12
192.168.18.12
192.168.18.9
192.168.18.9
Preferred Alternate LeastLoad Location Unknown
--------- --------- --------- -------- --------
4
Preferred Alternate LeastLoad Location Unknown
--------- --------- --------- -------- --------
0
0
WC Status
Connected
Connected
Connected
Connected
: 4096
: 4
: Location
0
0
: 4096
: 4
: Location
August 2013
4
0
4
0
127

Advertisement

Table of Contents
loading

Table of Contents