Avaya WLAN 8100 Series Reference page 242

ACLI Reference for wired networks
Procedure
To enable automatic PVID, use the following command from Global Configuration
mode.
[no] auto-pvid
Use the no form of this command to disable
Configuring VLAN port settings
About this task
Use the following procedure to configure VLAN-related settings for a port.
Procedure
To configure VLAN port settings, use the following command from Global Configuration
mode.
vlan ports [<portlist>] [tagging {enable | disable | tagAll |
untagAll | tagPvidOnly | untagPvidOnly}] [pvid <1-4094>]
[filter-untagged-frame {enable | disable}] [filter-
unregistered-frames {enable | disable}] [priority <0-7>] [name
<line>]
<portlist>
tagging {enable|disable|tagAll|
untagAll| tagPvidOnly|
untagPvidOnly}
pvid <1-4094>
filter-untagged-frame {enable|
disable}
filter-unregistered-frames {enable |
disable}
priority <0-7>
name <line>
242 Avaya WLAN 8100 CLI Reference
Variable Definitions
Variable
Comments? infodev@avaya.com
Value
Enter the port numbers to be configured for a VLAN.
Enables or disables the port as a tagged VLAN
member for egressing packet.
Sets the PVID of the port to the specified VLAN.
Enables or disables the port to filter received untagged
packets.
Enables or disables the port to filter received
unregistered packets. Enabling this feature on a port
means that any frames with a VID to which the port
does not belong to are discarded.
Sets the port as a priority for the switch to consider as
it forwards received packets.
Enter the name you want for this port.
Note: This option can only be used if a single port is
specified in the <portlist>
August 2013