Avaya WLAN 8100 Series Reference page 333

all
system
user
Removing system classifier element entries
About this task
Use the following procedure to remove system classifier element entries.
Procedure
Remove system classifier element entries by using the following command from Global
Configuration mode.
no qos system-element <1-55000>
Configuring QoS Actions
The configuration of QoS actions directs the WC 8180 to take specific action on each
packet.
The following sections describe configuring QoS actions using the CLI.
Related topics:
Creating and updating QoS actions
Removing QoS actions
Creating and updating QoS actions
About this task
Use the following procedure to create and update QoS actions.
Note: Certain options can be restricted based on the policy associated with the specific action.
An action that is referenced in a meter or an installed policy cannot be deleted.
Procedure
1. Create or update QoS actions by using the following command from Global
2. View QoS action by using the following command:
Avaya WLAN 8100 CLI Reference
Variable
on page 334
Configuration mode.
qos action <10-55000> [name <WORD>] [drop-action <enable |
disable | deferred-pass>] [update-dscp <0-63>] [update-1p
{<0-7> | use-tos-prec | use-egress}] [set-drop-prec <low-drop
| high-drop>] [action-ext <1-55000> | action-ext-name <WORD>]
Description
Displays all user-created, default, and system
entries.
Displays system entries only.
Displays only user-created and default entries.
on page 333
ACLI reference for wired networks
August 2013 333