Avaya WLAN 8100 Series Reference page 244

ACLI Reference for wired networks
Modifying VLAN Configuration Control settings
About this task
Use the following procedure to display the current VLAN Configuration Control setting.
Procedure
To display VLAN Configuration Control settings, use the following command from
Global Configuration mode.
show vlan configcontrol
About this task
Use the following procedure to modify the current VLAN Configuration Control setting. This
command applies the selected option to all VLANs on the switch.
Procedure
To modify VLAN Configuration Control settings, use the following command from
Global Configuration more
vlan configcontrol <vcc_option>
Variable Definitions
<vcc_option>
Managing the MAC address forwarding database table
This section shows you how to view the contents of the MAC address forwarding database
table, as well as setting the age-out time for the addresses.
The MAC flush feature is a direct way to flush MAC addresses from the MAC address table.
MAC flush deletes dynamically learned addresses. MAC flush commands may not be executed
instantly when the command is issued. Since flushing the MAC address table is not considered
an urgent task, MAC flush commands are assigned the lowest priority and placed in a queue.
The MAC flush commands are supported in CLI, SNMP, DM, and Web-based Management.
244 Avaya WLAN 8100 CLI Reference
Displaying VLAN Configuration Control settings
Modifying VLAN Configuration Control settings
Variable
Comments? infodev@avaya.com
on page 244
This parameter denotes the VCC option to use on the
switch. The valid values are:
• automatic -- Changes the VCC option to Automatic.
• autopvid -- Changes the VCC option to AutoPVID.
• flexible -- Changes the VCC option to Flexible.
• strict -- Changes the VCC option to Strict. This is the
default VCC value.
Value
August 2013