Avaya WLAN 8100 Series Reference page 125

AP
AP3 00:1B:4F:6A:18:E3
AP4 00:1B:4F:6A:18:E4
Important:
When a large number of APs are rebalanced, and if after the rebalance, the assignment of
APs does not change, the configured load-balancing metric is also not changed. This
ensures that the load-balancing metric is synchronized between the AP and all controllers
in the domain.
Procedure
1. Perform the following steps to load balance APs using the location metric.
Avaya WLAN 8100 CLI Reference
MAC address
a. View the current load balance status on controllers WC1 and WC2 as follows.
The load-balance status indicates that the current load-balancing metric is
LeastLoad. Also manual load balancing is not configured (preferred and
alternate controllers are not configured).
Load-balance status on WC1:
WC8180#show wireless domain load-balance status
Mobility Domain AP License
Mobility Domain AP License In Use
Configured Load Balancing Metric
Domain Load Balance Status per Method:
--------------------------------------------------------------------
---------------
APs load-balanced to WC
--------------------------------------------------------------------
Load-balance status on WC2:
WC8180#show wireless domain load-balance status
Mobility Domain AP License
Mobility Domain AP License In Use
Configured Load Balancing Metric
Domain Load Balance Status per Method:
--------------------------------------------------------------------
---------------
APs load-balanced to WC
--------------------------------------------------------------------
b. Configure the load balancing metric as location on both controllers (WC1
and WC2).
WC8180(config-wireless-lb)#lb-metric location
ACLI reference for the Wireless LAN (WLAN) 8100
AP IP Campus
address
172.16.2.103 Avaya
172.16.2.104 Avaya
Preferred Alternate LeastLoad Location Unknown
--------- --------- --------- -------- --------
0
Preferred Alternate LeastLoad Location Unknown
--------- --------- --------- -------- --------
0
Building Floor Sector
LeftWing Secon Lab2
dFloor
LeftWing Secon Lab2
dFloor
: 4096
: 4
: none
0 4
: 4096
: 4
: none
0 4
August 2013
0 0
0 0
125