Avaya WLAN 8100 Series Reference page 358

ACLI Reference for wired networks
Parameter
<unit_number>
<collector_ip_address>
Enabling IPFIX globally
About this task
Use the following procedure to globally enable IPFIX on the switch.
Procedure
1. Enter Global Configuration mode.
2. Use the ip ipfix enable command to enable IPFIX on the switch.
enable
Configuring unit specific IPFIX
About this task
Use the following command to configure unit specific IPFIX parameters.
Procedure
1. Enter Global Configuration mode.
2. Use the ip ipfix slot <unit_number> [aging-interval
Parameter
<unit_number>
<aging_interval>
358 Avaya WLAN 8100 CLI Reference
Variable Definitions
The unit number of the collector. Currently up to two collectors
are supported so the values 1 or 2 are valid.
The IP address of the collector.
Variable definition
Parameter
<aging_interval>] [export-interval <export_interval>]
[exporter-enable] [template-refresh-interval
<template_refresh_interval>] [template-refresh-packets
<template_refresh_packets>] command to enable IPFIX on the switch.
Variable Definitions
The unit number of the collector. Currently up to two collectors
are supported so the values 1 or 2 are valid.
The IPFIX aging interval. This value is in seconds from 0 to
2147400.
Comments? infodev@avaya.com
Description
Description
Enables the IPFIX globally.
Description
August 2013