Avaya WLAN 8100 Series Reference page 74

ACLI reference for Wireless LAN (WLAN) 8100
Enabling AeroScout on an AP profile
Before you begin
Ensure that you are in the wireless configuration mode on the Avaya CLI. Use the following
commands:
WC8180#conf t
WC8180(config)#wireless
WC8180(config-wireless)#
About this task
Use this procedure to create a sample AP profile and enable AeroScout on that profile.
Note:
AeroScout is disabled on an AP profile by default.
Procedure
1. Create an AP profile named AP-Profile-1 with profile ID 2.
2. Verify creation of the AP profile.
3. Enable AeroScout on the AP profile.
4. Verify AeroScout enablement.
74 Avaya WLAN 8100 CLI Reference
WC8180(config-wireless)#ap-profile 2
Creating ap-profile (id = 2) ...
WC8180(config-ap-profile)#profile-name AP-Profile-1
WC8180(config-ap-profile)#exit
WC8180#show wireless ap-profile 2 detail
Sample Output:
AP Profile Id: 2
Name
Country Code
AP Model
Is Default Profile? : No
AE Protocol Support : Disable
Status
WC8180(config-wireless)#ap-profile 2
Entering ap-profile (id = 2) configuration mode..
WC8180(config-ap-profile)#aeroscout enable
WC8180(config-ap-profile)#end
WC8180#show wireless ap-profile 2 detail
Sample Output:
AP Profile Id: 2
Name
Country Code
AP Model
Is Default Profile? : No
AE Protocol Support : Enable
Status
Comments? infodev@avaya.com
: AP-Profile-1
: IN
: Avaya APs (AP8120/AP8120-E)
: Associated
: AP-Profile-1
: IN
: Avaya APs (AP8120/AP8120-E)
: Associated & Modified
August 2013