Avaya WLAN 8100 Series Reference page 67

5. Verify Diffserv policy details. Use one of the following commands.
6. Associate a DiffServ classifier block with a DiffServ policy.
7. Configure a network profile.
Avaya WLAN 8100 CLI Reference
Src Mac: 01:02:03:04:05:06
Src Mac Mask: FF:FF:FF:FF:FF:FF
WCP8180#sh wireless diffserv policy
WCP8180#sh wireless diffserv policy
Policy Names
---------------------------
p1
Total number of policies: 1
WCP8180(config-diffserv-policy)#show wireless diffserv policy policy1
detail
A sample output is as follows:
WCP8180(config-diffserv-policy)#show wireless diffserv policy policy1
detail
Policy Name
------------------
policy1
CLI Reference:
WCP8180(config-wireless)#diffserv policy p1
Diffserv policy exists - 10
WCP8180(config-diffserv-policy)#classifierblock c1 ?
allow
drop
remark-cos
remark-dscp
remark-precedence
WCP8180(config-diffserv-policy)#
WC8180(config-diffserv-policy)#classifierblock c1 remark-cos ?
<0-7>
WC8180(config-diffserv-policy)#classifierblock c1 remark-dscp ?
<0-63>
WC8180(config-diffserv-policy)#classifierblock c1 remark-precedence ?
<0-7>
In this example, you configure a network profile named AVAYA-Demo associated
with a mobility VLAN Mobile-Clients.
Important:
When you configure an SSID for a network profile, ensure that it is unique across
the network. SSIDs can have a maximum of 32 characters.
Also, ensure that you do not configure SSIDs that have similar characters but are
different only in their case. For example, do not configure the SSIDs avaya-
demo and AVAYA-DEMO within the same network.
WCP8180(config-wireless)#network-profile 2
Creating network-profile (id = 2) ...
WCP8180(config-network-profile)#profile-name AVAYA-Demo
ACLI reference for the Wireless LAN (WLAN) 8100
Classifierblocks
---------------------------
classifier1
Allow packets
Drop packets
Remark CoS
Remark IP DSCP
Remark IP Precedence
Action
--------
Allow
August 2013 67