Managing Captive Portals - Avaya WLAN 8100 Series Reference

ACLI reference for Wireless LAN (WLAN) 8100

Managing Captive Portals

CLI reference:
WC8180#wireless captive-portal ?
Captive portal run time settings
client-deauthenticate
tftp-get
WC8180#wireless captive-portal client-deauthenticate ?
all
captive-portal-profile
H.H.H
network-profile
WC8180#wireless captive-portal client-deauthenticate network-profile ?
<1-64>
WC8180#wireless captive-portal client-deauthenticate captive-portal-profile ?
<1-10>
AMDC#wireless captive-portal tftp-get ?
address
About this task
Use the following commands to manage Captive Portals.
Procedure
1. Enter the wireless configuration mode of the CLI.
2. Use the command wireless captive-portal client-deauthenticate
3. Use the command wireless captive-portal client-deauthenticate
4. Use the command wireless captive-portal client-deauthenticate
5. Use the command wireless captive-portal client-deauthenticate
40 Avaya WLAN 8100 CLI Reference
• Profile Max Size Exceeded — the Captive-portal profile disk usage exceeds
the limit (8Mb)
Deauthenticate a specific client
Execute TFTP client to get customization files
Deauthenticate all clients
Deauthenticate the clients associated with
captive-portal profile
Authenticated client MAC address
Deauthenticate the clients associatd with
network-profile
Network profile ID
Captive portal profile ID
Controller IP address
all to revoke authentication on all clients.
captive-portal-profile <Captive Portal profile Id> to revoke
authentication on all clients associated with a particular Captive Portal profile.
<authenticated client MAC address> to revoke authentication on a
specific client.
network profile <network profile Id> to revoke authentication from all
clients associated with a particular network profile.
Comments? infodev@avaya.com
August 2013