Avaya WLAN 8100 Series Reference page 134

ACLI reference for Wireless LAN (WLAN) 8100
8. Use the command domain ap <ap_mac> image-update to configure AP
9. Use the command domain ap <ap_mac> reset-group-size to configure the
10. Use the command domain ap image-update image to enter the AP image
11. Use the command domain ap image-update server-ip to configure the
12. Use the command domain ap image-update server-port to configure the
13. Use the command domain ap image-update external-download to
14. Use the command domain ap image-update download-group-size <1 -
15. Use the command domain ap image-update model <ap8120> version
16. Use the command domain ap reset-group-size <1 - 100> to configure
17. Use the command domain auto-promoted-aps approve to approve all
18. Use the command domain ap model {ap8120 | ap8120-E | ap8120-O}
19. Use these commands for configuring domain options for a specific AP.
134 Avaya WLAN 8100 CLI Reference
image update related parameters.
Group size for AP(s) reset after download.
download configuration mode.
HTTP server address.
HTTP server port.
download an image from an external web server.
100> to configure the percentage of access points forming a group.
<1.0.0.0> filename <path/filename> server-ip <ip_addr>
server-port <portnum> to configure the model, version number of the AP
image, filename including http server path, server-ip address, and server port
number.
the percentage of access points in the domain that will be reset.
discovered APs.
to configure the AP model.
a. Use the command domain ap <ap_mac> alternate-controller to
configure an alternate wireless controller.
b. Use the command domain ap <ap-mac> alternate-wsp to configure an
alternate Wireless Switching Point (WSP).
c. Use the command domain ap <ap_mac> label to configure the AP label.
d. Use the command domain ap <ap_mac> location to configure the AP
location.
e. Use the command domain ap <ap_mac> preferred-controller to
configure the preferred AP controller.
f. Use the command domain ap <ap-mac> preferred-wsp to configure a
preferred WSP.
g. Use the command domain ap <ap_mac> profile-id to assign the
appropriate AP profile ID.
Comments? infodev@avaya.com
August 2013