Avaya WLAN 8100 Series Reference page 243

Configuring VLAN members
About this task
Use the following procedure to add or delete a port from a VLAN.
Procedure
To configure VLAN members, use the following command from Global Configuration
mode.
vlan members [add | remove] <1-4094> <portlist>
Variable
add | remove
<1-4094>
portlist
Configuring VLAN Configuration Control
About this task
VLAN Configuration Control (VCC) allows a switch administrator to control how VLANs are
modified. VLAN Configuration Control is a superset of the existing AutoPVID functionality and
incorporates this functionality for backwards compatibility. VLAN Configuration Control is
globally applied to all VLANs on the switch.
VLAN Configuration Control offers four options for controlling VLAN modification:
• Strict
• Automatic
• AutoPVID
• Flexible
Note:
The factory default setting is Strict.
VLAN Configuration Control is only applied to ports with the tagging modes of Untag All and
Tag PVID Only.
See the following commands for VLAN configuration control using the CLI.
Related topics:
Displaying VLAN Configuration Control settings
Avaya WLAN 8100 CLI Reference
Variable Definitions
Adds a port to or removes a port from a VLAN.
Note: If this parameter is omitted, set the exact port
membership for the VLAN; the prior port membership of the
VLAN is discarded and replaced by the new list of ports.
Specifies the target VLAN.
Enter the list of ports to be added, removed, or assigned to the
VLAN.
ACLI reference for wired networks
Value
on page 244
August 2013 243