Avaya WLAN 8100 Series Reference page 262

ACLI Reference for wired networks
Related topics:
Displaying LACP port mode
Displaying LACP system settings
Displaying LACP per port configuration
Displaying LACP port statistics
Clearing LACP port statistics
Displaying LACP port debug information
Displaying LACP aggregators
Configuring LACP system priority
Enabling LACP port aggregation mode
Configuring the LACP administrative key
Configuring LACP operating mode
Configuring per port LACP priority
Configuring LACP periodic transmission timeout interval
Configuring LACP port mode
About this task
Use the following procedure to display the current port mode (default or advanced).
Procedure
To display the port mode, use the following command from Privileged EXEC mode.
show lacp port-mode
About this task
Use the following procedure to display system-wide LACP settings.
Procedure
To display system settings, use the following command from Privileged EXEC mode.
show lacp system
About this task
Use the following procedure to display information on the per-port LACP configuration. Select
ports either by port number or by aggregator value.
Procedure
To display per port configuration, use the following command from Privileged EXEC
mode.
262 Avaya WLAN 8100 CLI Reference
on page 262
on page 263
on page 264
on page 266
Displaying LACP port mode
Displaying LACP system settings
Displaying LACP per port configuration
Comments? infodev@avaya.com
on page 262
on page 262
on page 263
on page 263
on page 264
on page 264
on page 264
on page 265
on page 266
on page 266
August 2013