Avaya WLAN 8100 Series Reference page 371

2. Enter the default logging remote level command to sets the severity level
Configuring port mirroring
About this task
Use the following CLI commands to configure port mirroring.
Related topics:
Displaying the port-mirroring configuration
Configure port-mirroring
Disabling port-mirroring
Displaying Many-to-Many port-mirroring
Configuring Many-to-Many port-mirroring
Disabling Many-to-Many port-mirroring
About this task
Use this procedure to display the existing port-mirroring configuration.
Procedure
1. Enter Privileged Executive mode.
2. Enter the show port-mirroring command to display the port-mirroring
About this task
Use this procedure to set the port-mirroring configuration
Procedure
1. Enter Global Configuration mode.
2. Enter the port-mirroring mode {disable | Xrx monitor-port
Avaya WLAN 8100 CLI Reference
of the logs sent to the remote server. The default level is none.
on page 371
on page 373
Displaying the port-mirroring configuration
configuration.
Configure port-mirroring
<portlist> mirror-ports <portlist> | Xtx monitor-port
<portlist> mirror-ports <portlist> | ManytoOneRx monitor-port
<portlist> mirror-ports <portlist> | ManytoOneTx monitor-port
<portlist> mirror-port-X <portlist> | ManytoOneRxTx monitor-
port <portlist> mirror-port-X <portlist> | XrxOrXtx monitor-
port <portlist> mirror-port-X <portlist> | XrxOrYtx monitor-
port <portlist> mirror-port-X <portlist> mirror-port-Y
<portlist> | XrxYtxmonitor-port <portlist> mirror-port-X
<portlist> mirror-port-Y <portlist> | XrxYtxOrYrxXtx monitor-
port <portlist> mirror-port-X <portlist> mirror-port-Y
<portlist> | Asrc monitor-port <portlist> mirror-MAC-A
ACLI reference for wired networks
on page 371
on page 373
on page 373
on page 374
August 2013 371