Avaya WLAN 8100 Series Reference page 31

3. Use the command show wireless captive-portal profile <ID>
4. Use the command captive portal profile <profile_number> block to
5. Use the command captive portal profile <profile_number> color to
6. Use the command captive portal profile <profile_number>
7. Use the command captive portal profile <profile_number> idle-
8. Use the command captive portal profile ip <ip-address> to configure
9. Use the command captive portal profile <profile_number> locale
10. Use the command captive portal profile <profile_number> max-
Avaya WLAN 8100 CLI Reference
end End configuration mode
exit Exit out of captive portal profile configuration mode
idle-timeout Configure session idle timeout
ip Captive-portal IP addresses
locale Configure captive portal locale settings
max-bandwidth Configure max bandwidth limit for transmit or receive
max-octets Configure max octets available per session
no Disable captive portal profile settings
profile-name Set captive portal profile name
protocol-mode Set captive portal protocol mode
redirect Enable HTTP redirect mode after authetication
redirect-url Configure redirected URL
session-timeout Set session timeout.
user-logout Enable user-logout mode for captive portal users
walled-garden Captive-portal Walled Garden hostname configuration mode
web-hostname Configure web hostname for Captive-Portal
WCP8180(config-cp-profile)#
detail to show details of the Captive Portal profile details for a specific Captive
Portal profile.
block profile traffic.
set the Captive Portal color scheme.
Command options:
WCP8180(config-cp-profile)#color ?
background Set background color
foreground Set foreground color
separator Set separator color
default to set Captive Portal profile parameters to default settings.
timeout to set the Captive Portal session idle timeout value. Enter the time in
seconds. The range is 0 to 2100000000 seconds.
a Captive Portal IP interface. Use the command, no ip < ip-address> to
remove the captive portal IP interface.
to set the Captive Portal locale settings.
For more information, see
locale on page 36.
bandwidth to configure the maximum transmit and receive bandwidth limits.
ACLI reference for the Wireless LAN (WLAN) 8100
Customizing Captive Portals — updating captive portal
August 2013 31