Avaya WLAN 8100 Series Reference page 324

ACLI Reference for wired networks
Related topics:
Configuring default QoS resource buffer
Modifying QoS resource buffer allocation
Configuring default QoS resource buffer
About this task
Use the following procedure to allocate the default QoS resource buffer.
Procedure
Restore the default the resource buffer by using the following command from Global
Configuration mode.
default qos agent buffer
Modifying QoS resource buffer allocation
About this task
Use the following procedure to modify QoS resource buffer allocation.
Procedure
1. Modify resource buffer allocation by using the following command from Global
2. View the QoS resource buffer allocaton by using the following command:
Example
WCP8180(config)#show qos agent details
QoS Operational Mode: Enabled
QoS NVRam Commit Delay: 10 seconds
QoS Queue Set: 2
QoS Buffering: Large
QoS UBP Support Level: Disabled
QoS Default Statistics Tracking: Aggregate
QoS DoS Attack Prevention: Enabled w/ Status Tracking
Minimum TCP Header Length: 20
Maximum IPv4 ICMP Length: 512
Maximum IPv6 ICMP Length: 512
Auto QoS Mode: Disabled
QoS Trusted Processing Mode: Partial
QoS Policy Device Ident. Descr: Avaya QoS Policy Agent (QPAv2) v6.2.0
QoS Policy Device Max. Message Size: 2048 bytes
________________________________________ __________ __________
ntnQosPrcSupportTable
ntnQosPolicyDeviceIdentTable
ntnQosInterfaceRoleTable
324 Avaya WLAN 8100 CLI Reference
Configuration mode.
qos agent buffer <regular | large | loseless | maximum>
show qos agent details
Policy Class Name
Comments? infodev@avaya.com
on page 324
on page 324
Current Maximum
Instances Installed
Instances
28 0
1 0
4 100
August 2013