Avaya WLAN 8100 Series Reference page 250

ACLI Reference for wired networks
Configuring STP values
Restoring default Spanning Tree values
Adding a VLAN to a STG
Removing a VLAN from a STG
Configuring STP and MSTG participation
Resetting Spanning Tree values for ports to default
Managing RSTP using the CLI
About this task
Use the following procedure to set the path cost calculation mode for all Spanning Tree Groups
on the switch.
Procedure
To configure path cost calculation mode, use the following command from Privileged
EXEC mode.
spanning-tree cost-calc-mode {dot1d | dot1t}
About this task
Use the following procedure to set the STG port membership mode for all Spanning Tree
Groups on the switch.
Procedure
To configure STG port membership mode, use the following command from Privileged
EXEC mode.
spanning-tree port-mode {auto | normal}
About this task
Use the following procedure to display spanning tree configuration information that is specific
to either the Spanning Tree Group or to the port.
Procedure
To display STP configuration information, use the following command from Privileged
EXEC mode.
show spanning-tree [stp <1-8>] {config | port| port-mode |
vlans}
250 Avaya WLAN 8100 CLI Reference
on page 252
on page 254
Configuring path cost calculation mode
Configuring STG port membership mode
Displaying STP configuration information
Comments? infodev@avaya.com
on page 253
on page 254
on page 254
on page 255
on page 256
August 2013