Avaya WLAN 8100 Series Reference page 47

Generating a certificate
You can generate self-signed certificates, with Self-Signed as the issuer name.
Generate a certificate by providing the following information.
• Common Name
• Country Code
• Email
• Key Size
• Organization Name
• Organization Unit
• State
• The number of days that the certificate will be valid
• Locality name
About this task
Use the following commands to generate X.509 certificates.
Procedure
Create a self-signed X.509 certificate by executing the following steps:
Common name is a mandatory parameter. The remaining parameters are
optional.
a. Enter the Crypto configuration mode of the CLI.
b. Use the following command to create a self-signed certificate:
Avaya WLAN 8100 CLI Reference
Note:
WLAN crypto configurations
certificate Certificate generation and mapping commands
end End wireless crytpo configuration mode
exit Exit from wireless crypto configuration mode
no Delete crypto configurations
WC8180(config-crypto)#certificate ?
Certificate generation and mapping commands
generate Generate a self-signed (X.509) certificate
import Import a certificate
map Assign a certificate to an application
WC8180(config-crypto)#certificate import ?
pkcs12 Import a PKCS12 certificate
WC8180(config-crypto)#certificate import pk
WC8180(config-crypto)#certificate generate ?
<1-16> Certificate Index
WC8180(config-crypto)#certificate generate
Use the following variables to help you create a specified certificate.
ACLI reference for the Wireless LAN (WLAN) 8100
August 2013 47