Avaya WLAN 8100 Series Reference page 162

ACLI Reference for wired networks
no SNTP enable command
The no SNTP enable command disables SNTP.
The syntax for the no SNTP enable command is: no sntp enable
The no SNTP enable command is executed in the Global Configuration command mode.
SNTP server primary address command
The SNTP server primary address command specifies the IP addresses of the primary
NTP server.
The syntax for the SNTP server primary address command is: sntp server
primary address <A.B.C.D>
The SNTP server primary address command can be executed in the Global
Configuration command mode.
The following table describes the parameters for this command.
Table 15: sntp server primary address command parameters
Parameters
<A.B.C.D>
SNTP server secondary address command
The SNTP server secondary address command specifies the IP addresses of the
secondary NTP server.
The syntax for the SNTP server secondary address command is: sntp server
secondary address <A.B.C.D>
The SNTP server secondary address command is executed in the Global Configuration
command mode.
The following table describes the parameters for this command.
Table 16: sntp server secondary address command parameters
<A.B.C.D>
no SNTP server command
The no SNTP server command clears the NTP server IP addresses. The command clears
the primary and secondary server addresses.
The syntax for the no SNTP server command is: no sntp server {primary |
secondary}
162 Avaya WLAN 8100 CLI Reference
Enter the IP address of the primary NTP server in dotted-
decimal notation.
Parameters
Comments? infodev@avaya.com
Description
Description
Enter the IP address of the secondary NTP server in
dotted-decimal notation.
August 2013